Soap Cage

Stainless Steel Soap Cages/Shakers/Savers is a cage entirely made from wire metal mesh with a handle. The cage could be opened so as to be able to place in this cage a piece or pieces of bar soap. These may be pieces that have become too small to be used as hand soap.

Application of Soap Cage

These plastic-free stainless steel soap cages/shakers/savers are for putting soap in to wash your dishes instead of using dish washing liquid.
Held by its handle the cage be vigorously shaken in a water filled bucket or other container after closing the cage. The shaking will move the water through the cage. The result is that the water will become soapy rich with suds to be used for all kinds of cleaning purposes. This way even small pieces of bar soap could be re-used and are not wasted.

Features of Soap Cage
- Anti-Rust
- Anti-Corrosion
- Non-Toxic And Tasteless
- Easy To Clean
- Environmental Friendly
Technical Details
- Stainless steel material for good anti-rust character.
- The cage/shaker could be opened and closed easily securely and completely by the hand ring and hinge rings.
- Standard dimensions: Width: 11 cm x Depth: 4 cm x Length: 25.5 cm(7.5cm cage length and 18cm handle length)

Specification of Soap Cage

Material:stainless steel

MOQ:100pcs

Edge wire diameter:2.75mm customized

Mesh wire diameter:1.75mm customized

Mesh opening size:12.5mmx12.5mm

Packing:each shaker/cage packed in paper/inner box and then master carton/ wooden box packing. Customized packing is acceptable.

Factory Production System

Document
1. Commercial Invoice including HS Code
2. Packing List including number of boxes,net weight,gross weight,Marks & Numbers
3. Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
4. Material Test Certificates as per EN 10204 3.1, EN 10204 3.2
5. Test Certificates certifying NACE MR0103, NACE MR0175
Testings
1. Positive Material Identification – PMI Testing
2. Chemical Analysis – Spectro Analysis
3. Mechanical Testing Such as Tensile, Elongation, Reduction of Area
4. Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
5. Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Packaging

The different ways in which our products are packed are:
1. Shrink-wrapped
2. Wooden Boxes
3. Wooden Pallets
4. Wooden Crates
5. Carton boxes
Marking

We mark Duplex 2205 as needed with the most suitable & visible marking techniques. Standard Marking System :-
1. Manufacturer’s Name or Trademark
2. Material Designation
3. Size Designation
4. Rating Designation
5. Melt Designation
6. Marking for Identification

Soap Cage | Soap Saver | Soap Shaker | Stainless Steel Soap Cage

Soap Cage | Saver

Soap Cage | Soap | Shaker

Application of Soap Cage

Related Products

Factory Production System

Document

Testings

Packaging

Marking

Looking for some more information ?