The common grade of Hastelloy mesh is Hastelloy C-276, which is also called Hastelloy filter or Hastelloy wire mesh demister. The general grade expression is: Hastelloy C-276, B-2, Hastelloy B-3 The common ones are the above two grades. The general weaving method of Hastelloy mesh is plain weave and twill weave. Due to the poor ductility of Hastelloy wire, the wire cannot be drawn very thin, which means it is very thin without Hastelloy wire. Thin, and not resistant to stretching, so it is impossible to weave a very high mesh mesh. Generally, the low mesh mesh is common. The high mesh mesh is extreme, and rarely can exceed 200 mesh.

Hastelloy is a nickel-based alloy, which is the most corrosion-resistant among modern metal materials. It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride salt solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance in low and medium temperature hydrochloric acid.

Hastelloy is an ultra-low carbon type, Ni, Mo, Cr series nickel-based, corrosion-resistant, high-temperature resistant material Hastelloy (Hastelloy), because it has excellent high-temperature resistance, oxidation resistance, and weld-affected zone resistance It is corrosive, has good long-term thermal stability and processability, and is used in harsh industrial environments such as agricultural chemicals, nuclear facilities, and biopharmaceuticals. It also has excellent corrosion resistance, uniform corrosion resistance and intergranular corrosion resistance in the medium of wet oxygen, sulfurous acid, acetic acid, formic acid and strong oxidizing salts. Therefore, it is also widely used in the chemical industry. Hastelloy Its electrical conductivity and thermal conductivity are much lower than that of low-carbon steel, and its resistivity and expansion rate are much higher than that of low-carbon steel. The molten pool has poor fluidity, poor wettability, low penetration and shallow penetration.

Commonly used grades: Hastelloy C-276 B-2, etc. Its products are made according to customer requirements.